For years there was a single trustworthy solution to store information on your computer – working with a disk drive (HDD). Nonetheless, this type of technology is by now showing it’s age – hard disks are really noisy and slow; they are power–ravenous and frequently generate a great deal of warmth throughout serious procedures.

SSD drives, alternatively, are quick, consume far less energy and tend to be far less hot. They provide a completely new solution to file accessibility and storage and are years in front of HDDs when it comes to file read/write speed, I/O effectiveness and also energy efficacy. Figure out how HDDs fare up against the modern SSD drives.

1. Access Time

SSD drives have a fresh & impressive method of data safe–keeping using the usage of electronic interfaces in lieu of just about any moving components and rotating disks. This brand new technology is considerably quicker, enabling a 0.1 millisecond data file accessibility time.

HDD drives rely on spinning disks for files storage reasons. When a file will be accessed, you have to wait around for the appropriate disk to reach the correct position for the laser beam to view the file in question. This results in a common access speed of 5 to 8 milliseconds.

2. Random I/O Performance

The random I/O performance is extremely important for the general performance of any data file storage device. We’ve carried out detailed assessments and have confirmed that an SSD can handle at the least 6000 IO’s per second.

With a HDD drive, the I/O performance steadily raises the more you use the drive. Nonetheless, just after it actually reaches a certain limit, it can’t go quicker. And due to the now–old technology, that I/O limitation is noticeably below what you might find with a SSD.

HDD are only able to go so far as 400 IO’s per second.

3. Reliability

SSD drives do not have any kind of rotating parts, which means that there is far less machinery included. And the fewer literally moving parts you will find, the lower the chances of failing are going to be.

The standard rate of failure of an SSD drive is 0.5%.

As we have already observed, HDD drives depend on spinning disks. And anything that employs a large number of moving parts for lengthy intervals is at risk of failure.

HDD drives’ regular rate of failing varies between 2% and 5%.

4. Energy Conservation

SSD drives are considerably smaller compared to HDD drives and also they don’t have virtually any moving components at all. Because of this they don’t produce just as much heat and require less electricity to function and much less energy for chilling purposes.

SSDs take in between 2 and 5 watts.

HDD drives can be notorious for getting noisy; they’re at risk from getting too hot and in case there are several disk drives in a hosting server, you’ll want an additional cooling device only for them.

As a whole, HDDs use up between 6 and 15 watts.

5. CPU Power

The faster the data accessibility speed is, the swifter the file calls will be processed. Consequently the CPU do not need to save allocations looking forward to the SSD to answer back.

The normal I/O delay for SSD drives is barely 1%.

Compared with SSDs, HDDs enable reduced data file accessibility speeds. The CPU must wait for the HDD to come back the inquired file, saving its resources in the meantime.

The regular I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

In the real world, SSDs function as perfectly as they did for the duration of our lab tests. We ran an entire system data backup on one of our own production servers. During the backup procedure, the standard service time for any I/O calls was below 20 ms.

With the same hosting server, but this time built with HDDs, the outcome were very different. The standard service time for any I/O request fluctuated in between 400 and 500 ms.

7. Backup Rates

Discussing back ups and SSDs – we have witnessed an amazing enhancement with the back up rate as we moved to SSDs. Right now, a regular web server backup can take simply 6 hours.

We used HDDs exclusively for quite a while and we have got very good familiarity with just how an HDD works. Backing up a server designed with HDD drives can take around 20 to 24 hours.

Our Linux shared hosting accounts feature SSD drives by default. Be a part of our hosting24hour family, and find out how we can assist you supercharge your website.

  • Service guarantees

  • Join us today. There aren’t any setup fees you’ll also find full SSH/full root access to the server. 99.9% network uptime is warranted.
  • Compare our prices

  • Have a look at our prices and pick the very best Virtual Private Server for your powerful sites. You can upgrade to a more advanced VPS configuration with only a click.
  • Compare our hosting plans
  • Contact Us

  • Contact us 24 hours a day by email or by making use of hosting24hour’s ultra–fast ticketing platform. Our technicians are prepared to reply to any queries within 1 hour.